11Feb/110
LiteTouch has encountered an Environment Error (Boot into WinPE!)
After I disabled a couple of steps in the task sequence, I was confronted with this error that had me puzzled for a while. However it was not related to my changes. The deployment before the changes ended in errors and the clean-up didn’t finish all the way afterwards. When you start a new deployment it checks if a deployment is already in process on that computer. The harddrive had a partition with the folders minint and _SMSTaskSequence on it.
There are two ways to fix this issue:
Option 1:
- Start into PXE and when the error is presented press F8
- In the console type: diskpart
- Type: select disk 0
- Type: clean
Option 2:
- Start into PXE and when the error is presented press F8
- In the console type: c:
- Type: format c: /Q
March 23rd, 2011 - 08:43
Really really, thank you!! Option 1 worked like a charm!!
May 19th, 2011 - 15:03
Спасибо, очень помогло!)
Thank you!)
February 29th, 2012 - 22:55
You.Are.A.Life.Saver. Thank you sooo much for posting this!!
March 1st, 2012 - 08:20
You’re most welcome!
February 15th, 2013 - 13:12
Worked a charm! Thanks muchly.
February 19th, 2013 - 07:59
You’re welcome!
June 11th, 2013 - 16:01
Option 1 worked for me it got me all the way until the PC reboots but once it does that the same error comes up and will not load the OS. Any suggestions?
June 11th, 2013 - 17:11
Im sorry nevermind it was a bad HD.
February 6th, 2015 - 17:19
¡Muchas gracias por la ayuda!
October 24th, 2015 - 17:19
Thanks a lot Mischa. Option #1 worked perfect.